 |
Inside Tech
Almost ten years ago, when we first started making the P. Series, it was a little bit of an experiment and we weren’t quite sure where it was headed. We just knew we needed a rock-solid rig that could handle everything from dirt jumping to urban assault and freeriding to skate part sessions. As the sport’s evolved, so has the P., and today it features one of the most refined and advanced frames—built from either A1™ alloy or 100% Cr-Mo steel—and a parts pick that’s tough enough for any terrain.
Call For Guaranteed Lowest Price MSRP $1750.00 (313) 561-2560
The Ten Essentials Proper Bike Fitting Jack's Bicycle Fitting
Advertised Retail Price not including shipping, handling or dealer set up.
Specialized prohibits the sale of any bicycle through the mail, in store sales only.
| FRAME | A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, replaceable 98954020 alloy hanger, disc only |
| REAR SHOCK | N/A |
| FORK | Marzocchi DJ1 SL, 100mm, 32mm alloy stanchions, alloy steerer w/ bolt-on crown, one piece magnesium lower, air assist and external reb. adj, 1 side heavy coil spring(w/ axle), 20mm axle, disc only |
| HEADSET | FSA PIG FS, 1 1/8" threadless |
| STEM | Truvativ Hussefelt, forged alloy, 31.8mm, 0 degree rise |
| HANDLEBARS | Specialized butted alloy 31.8mm, 640mm wide, 50mm rise, 8 degree back, 8 degree up sweep |
| TAPE/GRIPS | Specialized micro flange, Kraton w/ CNC alloy bar end plug |
| FRONT BRAKE | Hayes Stroker Ryde, hydraulic, 6" v-cut rotor |
| REAR BRAKE | Hayes Stroker Ryde, hydraulic, 5" v-cut rotor |
| BRAKE LEVERS | Hayes Stroker Ryde, hydraulic |
| FRONT DERAILLEUR | N/A |
| REAR DERAILLEUR | SRAM X-9, short cage |
| SHIFT LEVERS | SRAM X-5 trigger |
| CASSETTE FREEWHEEL | SRAM PG-950, 9-speed, 11-25t |
| CHAIN | KMC X9, 1/2" x 3/32" w/ reusable Missing Link |
| CRANKSET | Fuse SL 2pc, 175mm length, heat treated Sanko Cr-Mo tubular arms, hollow 19mm Cr-Mo spindle |
| CHAINRINGS | 32A w/ ISCG mounted E.13 "32 Special" chain guide |
| BOTTOM BRACKET | Fuse SL Euro, for 2pc crank, alloy cups, 4x cartridge bearings, alloy tube spacer, 6x steel outside adjust spacer, 1pc chainring bolt |
| PEDALS | Specialized Lo-Pro Mag II, magnesium body, heat treated 9/16" Cr-Mo spindle, sealed cartridge bearings |
| RIMS | Specialized/Alex P.Disc 26, double wall, eyelets, for disc brakes |
| FRONT HUB | Specialized Hi Lo 20mm, CNC flange and disc mount, sealed cartridge bearing, 32h, for 20mm thru-axle |
| REAR HUB | Specialized 10mm through axle cartridge cassette, CNC flanges and disc mount, sealed cartridge bearings, 32h, hollow Cr-Mo through axle |
| SPOKES | 1.8mm (15g) stainless, alloy nipples |
| FRONT TIRE | Specialized Rhythm Control, 26x2.3", 60TPI, aramid bead |
| REAR TIRE | Specialized Compound Pro, 26x2.2", DC, 60TPI, aramid bead |
| TUBES | Specialized schraeder valve |
| SADDLE | Specialized Fuse SL, super light foam, hollow 8mm Cr-Mo rails w/ rail brace tube |
| SEAT POST | Specialized two bolt, no offset, micro adjust, 30.9mm |
| SEAT BINDER | CNC'd alloy, single bolt |
| NOTES | Chain stay protector, reflectors, owners manual |
