WHEEL BUILDING & SPOKE TOOLS

These spoke holders effectively eliminate spoke twist when truing or building wheels with bladed spokesThanks to their design, the spoke can be held close to the nipple, which eliminates twistingCompatible with all DT Swiss nipple wrenchesSpoke WrenchRedAerolite0.8-1.0mmTTSXXXXR23005S

These spoke holders effectively eliminate spoke twist when truing or building wheels with bladed spokesThanks to their design, the spoke can be held close to the nipple, which eliminates twistingCompatible with all DT Swiss nipple wrenchesSpoke WrenchBlackAerocomp1.0-1.3mmTTSXXXXS23006S

Rebuild kit for the CSH1 Spoke HolderRebuild KitCSH-12230K

The CSH-1 securely holds spokes in place during spoke tension adjustment to prevent wind-up of round and bladed spokes, as well as rotation of straight-pull spokesThe versatile head can grip spokes in multiple positions for optimal leverage and hand positioningCompatible with round and bladed spokes 2.3 mm (13 gauge) wide or lessCompatible with J-bend and straight pull spokes Spoke HolderCSH-1

Digital spoke tension meter quickly and accurately provides tension readingsSpoke Tension MeterC-738

Circle spoke wrench compatible with 5 sizes of spoke nipplesCompatible with 10, 12, 13, 14, and 15 gauge Not intended for use with aluminum nipples - may cause damageSpoke WrenchSilver10/12/13/14/15GC-120

Set includes 3.23, 3.30, and 3.45 sizesInvestment cast, heat-treated tool steel wrench features 3-side and 4-side openingsDurable plastic handle reverses to provide ideal ergonomics with both openingsPrecision-cut wrench opening are perfectly sized for fit and speedSpoke Wrench SetYellow/Green/Orange3.23, 3.30, 3.456460452

Ideal for wheel truing when there’s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holderThe SW-9 combines two common spoke nipple sizes, .127”/3.23mm (Park Tool Black SW-0) and .136”/3.45mm (Park Tool Red SW-2)Forged, machined, heat treated, plated and vinyl dipped for years of dependable useSpoke WrenchBlk.127”/3.23mm | .136”/3.45mmSW-9

Toe-in alignment gauge for all tadpole recumbentsLaser engraved graduations in millimetersTelescoping with twist lock actionLightweight aluminumHang hole for easy storageToe-In Alignment gauge

Adapter for installing a wheel with Thru Axle Hub on a wheel truing standAvailable for both 12mm and 15mm Thru axlesMay be used with both front and rear wheelAxle AdapterSilver12/15mm

Lightweight truing standFolds compactlyFix dish, hops and side-to-side w/ this standTruing Stand

With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tiresUpright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in secondsThe uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with...